TYPES OF MODERN TOOLS USED FOR GLASS REPAIR
Whenever a windshield gets chipped or cracked, it’s imperative to repair it right away. If left untreated, small chips may eventually grow into something much more costly to repair. Proper auto glass repair requires the use of several modern tools to ensure the repair lasts for a long time.
MODERN TOOLS USED TO REPAIR CHIPS AND CRACKS
Repairing auto glass takes a combination of skill and the right tools. While there are many kits available to repair chips and cracks, not all of them contain the most up-to-date tools. Choosing the most modern tools is the best way to ensure the repair is done right.
- Repair Resins
Resins are used to fill different types of windshield damage. There are several kinds of resins on the market, including low and high viscosity options. The type of resin used depends on the extent of the damage.
Minor chips, such as small star chips, respond well to low viscosity resins. A small amount of resin is injected directly into the chip. As the resin dries, it hardens and bonds to the glass.
High viscosity resin is better suited for longer, deeper cracks. This type of resin is thicker, and can penetrate deeper into the glass. Since most home repair kits only contain low viscosity resin, a professional auto glass repair technician is usually needed for more substantial damage.
- Ultraviolet Curing Lights
Once the resin has been injected into the chip, it needs to dry and harden. This process can be accelerated with the use of UV curing lights. Ultraviolet rays create a chemical reaction in the resin, causing it to harden and bond to the surface. The use of UV lights has significantly helped decrease the drying and waiting time after cracked windshield repair.
- Glass Primers
It’s important to properly prepare the glass before attempting a repair. Auto glass primers are used to clean and remove moisture from the windshield. Once the glass has been primed, the resin will better adhere to the glass.
Be sure to choose the right type of windshield primer. There are different primers available, depending on whether the glass is tempered or laminated. Glass primer is used by most repair technicians, and it can also be purchased from an auto parts store.
PREVENT DAMAGE WITH THE RIGHT TOOLS
While it may be tempting to use everyday tools to repair a cracked windshield, it’s not recommended. For example, using a screwdriver to scrape away debris or excess resin may actually scratch and damage the glass even more. Always buy tools that are made specifically for glass repair.
A windshield scraper and windshield knife may be used to smooth out the resin, or remove excess adhesive. If the entire glass panel needs to be replaced, a clip remover and suction cup will make the job easier.
GOAL OF WINDSHIELD REPAIR
The ultimate goal of any windshield repair is to improve the integrity of the glass, while also increasing the lifespan of the windshield. Once a chip is properly filled and cured, the risk of future damage is greatly reduced.
The windshield is one of the main structural support systems of a vehicle. Many people don’t realize this, but it also fully supports the frame of a vehicle in the event of a rollover accident. Cracks and chips of all sizes will therefore affect the safety of the vehicle.
Drivers should remember to repair all windshield cracks before they get worse. Proper repair by a local windshield repair technician will reduce the risk of the glass collapsing in an accident. Repairs are affordable, and a full windshield replacement can often be avoided if the damage is small. Make sure the technician uses the most modern glass repair tools for the best results.